diff --git a/content/page/homelab/index.md b/content/page/homelab/index.md
index 55506f6..72f3da0 100644
--- a/content/page/homelab/index.md
+++ b/content/page/homelab/index.md
@@ -80,6 +80,7 @@ Here is the layout of my nodes:
 | **NIC**   | 1Gbps (+ 2.5Gbps)       | 1Gbps + 2.5Gbps         | 1Gbps + 2.5Gbps          |
 | **M.2**   | 2                       | 1                       | 1                        |
 | **2,5"**  | 2                       | 2                       | 1                        |
+Each node follows the same disk layout: a 256GB SSD in the 2.5" bay for the operating system and a 1TB NVMe drive for data storage.
 ### Network
 
 For the network, I had two main objectives: implement VLANs for network segmentation and manage my firewall for more granular control. Since my nodes were equipped with 2.5Gbps NICs, I needed switches that could handle those speeds, and a few Power over Ethernet (PoE) ports for my Zigbee antenna and what could come after.
@@ -102,16 +103,15 @@ Options were limited, there was no way I was going to convince my wife that our
 The best solution I came up with was to drill two 40mm holes above the kitchen cabinet. I ran PVC pipes through the wall and installed two small fans, each cushioned with foam to minimize vibrations and keep noise down.
 
 Inside the rack, I also added two 80mm fans to help with airflow. To keep everything quiet, I hooked up a PWM controller to regulate fan speeds, striking a balance between airflow and silence.
-
-
-
-
-
-
-
-
-
 ### Photos
+
+Here what is look like
+
+![homelab-rack.jpg](img/homelab-rack.jpg)
+
+![homelab-enclosure-open.jpg](img/homelab-enclosure-open.jpg)  ![homelab-enclosure-closed.jpg](img/homelab-enclosure-closed.jpg)
+
+
 ## Software Stack
 ### Hypervisor
 ### Network
diff --git a/content/post/blog-deployment.md b/content/post/blog-deployment.md
index 7756d7a..b205996 100644
--- a/content/post/blog-deployment.md
+++ b/content/post/blog-deployment.md
@@ -161,7 +161,7 @@ jobs:
           git push -u origin main
 ```
 
-Obsidian uses wiki-style links for images, like `![[image name.png]]`, which isn't compatible with Hugo out of the box. Here's how I automated a workaround in a Gitea Actions workflow:
+Obsidian uses wiki-style links for images, like `![image_name.png](img/image_name.png)`, which isn't compatible with Hugo out of the box. Here's how I automated a workaround in a Gitea Actions workflow:
 - I find all used image references in `.md` files.
 - For each referenced image, I update the link in relevant `.md` files like `![image name](img/image_name.png)`.
 - I then copy those used images to the blog's static directory while replacing white-spaces by underscores.
diff --git a/static/img/homelab-enclosure-closed.jpg b/static/img/homelab-enclosure-closed.jpg
new file mode 100644
index 0000000..c2237fb
Binary files /dev/null and b/static/img/homelab-enclosure-closed.jpg differ
diff --git a/static/img/homelab-enclosure-open.jpg b/static/img/homelab-enclosure-open.jpg
new file mode 100644
index 0000000..c48c58b
Binary files /dev/null and b/static/img/homelab-enclosure-open.jpg differ
diff --git a/static/img/homelab-rack.jpg b/static/img/homelab-rack.jpg
new file mode 100644
index 0000000..5948b5e
Binary files /dev/null and b/static/img/homelab-rack.jpg differ